EN
BE
DE
TL
FI
FR
HI
ID
IT
JA
KO
NL
PL
PT
SV
TR
The 8.0 Inch AMOLED Display Module (Model: BR800TR101GG-001) is a high-resolution, flexible AMOLED panel designed for premium applications requiring superior image quality and fast response. With a native 2480×1860 resolution (4:3 aspect ratio), MIPI DSI interface, and integrated SPI touch controller, this display delivers stunning visuals and responsive touch performance. Ideal for industrial HMI, medical imaging, high-end tablets, and smart control systems.
Key Features
Screen Size: 8.0 inch Flexible AMOLED Panel
Resolution: 2480 × 1860 pixels (FHD, 4:3)
Aspect Ratio: 4:3 (Perfect for document & productivity apps)
Active Area: 162.688 × 122.016 mm
Outline Dimension: 165.89 × 126.12 mm
Refresh Rate: Up to 60Hz
Display Interface: 4-lane MIPI DSI (D-PHY)
Touch Interface: SPI with ST FST1BA80YA2 IC
Driver IC: RM69380 (Raydium)
Contrast Ratio: >100,000:1 (Typical for AMOLED)
Response Time:<1ms (Typical)
Green Design: RoHS compliant, eco-friendly materials
Technical Specifications
| Parameter | Value |
|---|---|
| Model No. | BR800TR101GG-001 |
| Screen Size | 8.0 inch |
| Technology | Flexible AMOLED |
| Resolution | 2480 × 1860 (FHD, 4:3) |
| Pixel Format | RGB Stripe |
| Active Area | 162.688 × 122.016 mm |
| Module Size | 165.89 × 126.12 mm |
| Interface | MIPI DSI (4-lane), SPI Touch |
| Driver IC | RM69380 (Raydium) |
| Touch IC | FST1BA80YA2 (STMicroelectronics) |
| Touch Type | DOT (Direct on Top) Capacitive |
| Power Supply (ELVDD) | 4.55 ~ 4.65 V |
| Power Supply (AVDD) | 7.52 ~ 7.68 V |
| Current Consumption (Typ.) | ~452 mA @ 430 nits (White) |
| Operating Frequency | 60 Hz |
| Operating Temp. | -20°C ~ +70°C (Refer to RA test) |
| Storage Temp. | -30°C ~ +80°C (Refer to RA test) |
| Compliance | RoHS, Green Design |
Application Scenarios
Industrial: Human-machine interfaces (HMI), control panels, automation systems.
Medical: Portable diagnostic devices, patient monitors, surgical displays.
Consumer Electronics: High-end tablets, smart home hubs, e-readers with color.
Automotive: Cockpit displays, rear-seat entertainment (custom integration).
Handling & Integration Precautions
Avoid bending or pressing the flexible FPC beyond specifications.
Follow correct power sequence: AVDD → ELVDD → RESET → MIPI signal.
Use ESD protection during assembly; ground workbench and tools.
Do not short ELVDD/ELVSS pins; use proper PMIC (e.g., NT50379WHB).
Keep connector area clean and avoid dust during installation.
Frequently Asked Questions (FAQ)
What is the resolution of the 8.0 Inch AMOLED Module?
The module has a resolution of 2480×1860 pixels with a 4:3 aspect ratio, ideal for productivity and document-based applications.
What interface does this AMOLED module use?
It uses a MIPI DSI interface (4-lane) for display data and a SPI interface for the integrated capacitive touch controller.
Which driver and touch ICs are used?
The display is driven by the RM69380 (Raydium) IC, and the touch function is handled by the FST1BA80YA2 (STMicroelectronics) IC.
Is the display suitable for outdoor use?
While AMOLED offers high contrast, brightness is typically ~430 nits (normal), ~600 nits (HBM). For outdoor use, consider sunlight-readable variants or add anti-reflective coating.
What is the operating temperature range?
The recommended operating temperature is -20°C to +70°C. Storage range is -30°C to +80°C. Refer to RA test results for extended reliability.
Does it support Always-On Display (AOD) mode?
Yes, the module supports AOD (Always-On Display) mode for low-power time/status display, configurable via IC commands.
Interested in integrating this 8.0 Inch AMOLED solution?
Request a Quote<!--!doctype-->
